Bell-gossett P76966E Booster Pumps 11/2HP Bedienungsanleitung PDF herunterladen

INSTALLER:

PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.

DESCRIPTION

For applications requiring higher flow and head pressures, Bell

& Gossett provides an entire range of booster pumps. The

designs of these pumps are based on three-part configuration

which offers complete field repairability and compact con-

struction. All Bell & Gossett boosters are equipped with the

incomparable B&G manufactured motor for quiet and efficient

operation.

These pumps are for indoor use only.

PUMP APPLICATION

Bell & Gossett Booster Pumps may be used for hydronic heat-

ing and cooling systems, domestic water, industrial applica-

tions and general service operations. Bell & Gossett recom-

mends that bronze constructed pumps be used for pumping

potable water.

OPERATIONAL LIMITS

These pumps are designed to pump liquids compatible with

their iron or bronze body construction. This pump line delivers

maximum capacities from 100 GPM to 150 GPM. Unless spe-

cial provisions have been made by ITT Bell & Gossett, the

operational limits for Series 2

/2", LD3, HD3, PD35, PD37,

PD38 & PD40 Pumps are listed below.

Max. Working Pressure: 125 psi

Max. Operating Temperature: 225°F

Electrical Rating: 115/230V, 60 Hz, 1PH

208-230/460V, 60 Hz, 3PH

(

/4 HP only) 115V or 230V, 60 Hz, 1PH

Motors with special electrical characteristics are available on

request. Contact your local Bell & Gossett Representative for

details.

SAFETY

INSTRUCTIONS

This safety alert symbol will be used in this manual and on the

pump safety instructions decal to draw attention to safety

related instructions. When used, the safety alert symbol

means ATTENTION! BECOME ALERT! YOUR SAFETY IS

INVOLVED! FAILURE TO FOLLOW THE INSTRUCTIONS MAY

RESULT IN A SAFETY HAZARD.

Your Booster Pump should have this warning label affixed to

the pump near the conduit box cover. If this warning is

missing or illegible, contact your local Bell & Gossett

Representative for a replacement.

INSTRUCTIONS FOR THE

FOLLOWING B&G PRODUCTS:

/2", LD3, HD3, PD35, PD37, 1HP & 1

/2HP

WARNING

BEFORE INSTALLING, USING OR

SERVICING THIS PRODUCT,

READ THE WARNING NOTES

AND INSTRUCTIONS IN

INSTRUCTION MANUAL.

FAILURE TO DO SO MAY

RESULT IN SERIOUS INJURY

OR PROPERTY DAMAGE

V56845

Booster Pumps

INSTRUCTION MANUAL

P76966E

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Booster Pumps

INSTALLER:PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.DESCRIPTIONFor applications requiring higher flow and head pressures, Bell& Gossett provi

Seite 2 - SAFETY REQUIREMENTS

ELECTRICAL SAFETYMECHANICAL SAFETYWARNING: EXCESSIVE SYSTEM PRESSURE HAZARDThe maximum working pressure of the pump is listed onthe nameplate – DO NOT

Seite 3 - PUMP INSTALLATION

WARNING: HOT WATER HAZARDWhen disassembling a gasketed joint, always use anew gasket upon reassembly. NEVER RE-USE OLD GAS-KETS. Failure to follow the

Seite 4 - WIRING INSTRUCTIONS

Remove the screws securing the conduit box cover (wiringcompartment) and lift off the cover. Attach the appropriatesize connector to the hole in the s

Seite 5 - Mechanical Seal

DETERMINE THE SEAL TYPECut away diagrams have been provided to illustrate the compo-nents of the booster bearing assemblies. The primary featuredistin

Seite 6 - Fax: (847) 965-8379

to assemble the seal by placing the components on theshaft individually. The notches in the brass collar shouldbe aligned with the recesses

Kommentare zu diesen Handbüchern

Keine Kommentare

Bell-gossett P76966E Booster Pumps 11/2HP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Pumpen Bell-gossett P76966E Booster Pumps 11/2HP herunter. Bell & Gossett P76966E Booster Pumps 11/2HP User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Pumpen Bell-gossett P76966E Booster Pumps 11/2HP